Post by smetaxas on Aug 21, 2019 17:20:47 GMT
I built a studio down in the basement of my new house & need some advice. The room is 12' wide x 15' 8" long x 7' 5" high. From inside the Studio, the entry door is at the front to the right of the studio desk.
I built 2 - 24" wide bass traps in the back & a 17" bass trap in the front left corner to squeeze in where the electrical jack was. I plan on stacking Rockwool insulation cut triangles in these & covering with 1" OC-703 panels covered in fabric.
I was also going to hang 2 of the 1" 4'x4' panels on each side wall.
A friend of mine gave me a bunch of 4'x4' 1" OC-703 fabric-covered panels (16) plus an additional 7 - 4'x 8' raw 1" OC-703 sheets. There are a bunch of assorted smaller panels in different fabrics but I need to stretch the material for the 16 4'x4' pre-made panels since the color goes well in my room. He also gave me about 40 1' x 1' pre-made 1" panels of OC-703 covered in a similar fabric.
I also have 4 - 2'x2' Diffusers from my old studio (I might have access to 2 more) & was planning on putting them on the back wall over a couch. In addition, I have 10 Aurelex T-Fusers that I was planning on putting in the other room over the drum kit on a higher ceiling but not married to that idea.
I was planning on putting a cloud of 2 of the 4'x4' panels doubled up to 2" each & hanging about 2" to 3" from the ceiling over the mix position. Also, at least a 48" wide 2" panel in front of the cloud slanted between the studio window & the ceiling.
I'm really open for some advice about how to best use my resources. You guys are a wealth of knowledge!
I built 2 - 24" wide bass traps in the back & a 17" bass trap in the front left corner to squeeze in where the electrical jack was. I plan on stacking Rockwool insulation cut triangles in these & covering with 1" OC-703 panels covered in fabric.
I was also going to hang 2 of the 1" 4'x4' panels on each side wall.
A friend of mine gave me a bunch of 4'x4' 1" OC-703 fabric-covered panels (16) plus an additional 7 - 4'x 8' raw 1" OC-703 sheets. There are a bunch of assorted smaller panels in different fabrics but I need to stretch the material for the 16 4'x4' pre-made panels since the color goes well in my room. He also gave me about 40 1' x 1' pre-made 1" panels of OC-703 covered in a similar fabric.
I also have 4 - 2'x2' Diffusers from my old studio (I might have access to 2 more) & was planning on putting them on the back wall over a couch. In addition, I have 10 Aurelex T-Fusers that I was planning on putting in the other room over the drum kit on a higher ceiling but not married to that idea.
I was planning on putting a cloud of 2 of the 4'x4' panels doubled up to 2" each & hanging about 2" to 3" from the ceiling over the mix position. Also, at least a 48" wide 2" panel in front of the cloud slanted between the studio window & the ceiling.
I'm really open for some advice about how to best use my resources. You guys are a wealth of knowledge!