|
Post by immi D on Jan 24, 2019 17:42:18 GMT
hi i have a behringer xenyx1202fx and i want to take sound from my mixer to my laptop i have a 1/4inch to 3.5mm cable but i really cant seem to get it working. Ive watched loads of videos too please help.
|
|
|
Post by rock on Jan 24, 2019 18:36:47 GMT
Hi immi, Before we get to your hook-up situation, I suggest you make sure your mixer works with a regular amp/speaker or powered speaker and or headphones using at least one mic and a line input just to make sure the mixer works and you know how to work it. After that, you'll probably want to run a stereo signal into your computer. You'll need a cable like this: www.musiciansfriend.com/accessories/livewire-1-8-trs--dual-1-4-y-cable?rNtt=1/4Plug the 1/4" plugs into the Main L & R outputs and plug the 1/8" end into your computer input. You'll probably need to get to the audio setup in your computer to make sure your input is active. There you should also be able to set the input level. I have a Mac and for me it's in the "System Preferences".
|
|