jared
Junior Member
Posts: 57
|
Post by jared on Aug 18, 2020 16:51:51 GMT
oh yes - your youtube video. thank you! will try my best to navigate it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 18, 2020 19:14:36 GMT
Or you can angle the desk. Those weird ringings in your waterfall are probably due to your guitars especially acoustic one.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 18, 2020 19:29:28 GMT
Try to do this if you can, post a picture of your ETC graph. Make it only show the Envelope (ETC) and in limits menu make it to show first 15ms or so. Like this:
|
|
jared
Junior Member
Posts: 57
|
Post by jared on Aug 18, 2020 19:34:23 GMT
sorry, got it. did the exercise. makes a lot of sense.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 18, 2020 19:35:57 GMT
Hey Pasim, using an SPL meter aimed at the ceiling at tweet height. the MDAT file is 50mb and i think the limit for uploads on this forum is 2mb? If you take first L speaker, save it and .Zip it, should be just tad less than 2mb. Just make 3 files zipped L,R and L+R
|
|
jared
Junior Member
Posts: 57
|
Post by jared on Aug 18, 2020 19:51:41 GMT
ive been trying to get it to work for the last 20 minutes. not able to figure it out. i took new measurements today,. the file is 8mb. any way i can send u the Mdat file?
|
|
jared
Junior Member
Posts: 57
|
Post by jared on Aug 18, 2020 19:54:16 GMT
|
|
jared
Junior Member
Posts: 57
|
Post by jared on Aug 18, 2020 20:01:00 GMT
|
|
jared
Junior Member
Posts: 57
|
Post by jared on Aug 18, 2020 20:27:41 GMT
I was able to find the previous day's left speaker measurement which is a smaller file - 1.8mb. Slightly different monitor position. LEft speaker previous day.mdat.zip (1.71 MB)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 19, 2020 5:53:09 GMT
Quite huge difference between that previous day left and new right, but its understandable if you changed position..
The right speaker ETC looked quite nice, no sharp peaks, your desk definitely affects to some degree, but not causing a sharp peak! Which is good.
That wide dip around 70-95hz is quite severe, I would try different speaker position or just decreasing or increasing the height might make it way better.
|
|
jared
Junior Member
Posts: 57
|
Post by jared on Aug 19, 2020 10:38:43 GMT
thanks Pasim. will give it a go. appreciate all your advise
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 19, 2020 12:31:32 GMT
Have you tried your shape twins in horizontal position? I really suggest going "crazy" with positioning. But remember to take breaks (just to maintain your sanity, don't wanna know how many times i've lost my mind....)
|
|
jared
Junior Member
Posts: 57
|
Post by jared on Aug 19, 2020 13:43:15 GMT
Apparently you cant put the shape twins on the side as the drivers are on the side, not rear ported.
Is there any more acoustic treatment you would recommend in the room? My floating ceiling panels are not exactly above my listening position, a little bit forward. Maybe I should re-position these?
Maybe more acoustic panels on the ceiling or the corners of the ceilings where the wall joins the ceilings?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 19, 2020 14:02:30 GMT
How is it sounding to you ? Are you doinng mixing work, how's the translation ?
|
|
jared
Junior Member
Posts: 57
|
Post by jared on Aug 19, 2020 14:49:36 GMT
I'm doing mixing work. Something sounding phasey and missing lots of bass...
|
|