|
Post by forumking on May 9, 2016 18:28:18 GMT
Hi, New to the forums, and learning a great deal thanks to Ethan and other sites, so thank you for that. I'm just in the middle of treating my room, here is a pic of its dimensions and the readings from REW - I'd be very interested in peoples thoughts and suggestions for getting a flatter response, especially trying to iron out that dip at about 70-90hz Also, here is the REW file if anyone wants a closer look - we.tl/temj6b44V5Many thanks
|
|
|
Post by Rock on May 9, 2016 20:11:18 GMT
Hi, I just found this cool online room mode calculator, amroc.andymel.eu/?l=11&w=10&h=7.5&ft=true&r60=0.6 (I have a Mac:( Check it out (or just try Ethan's), it's got some cool graphics and some suggestions. If you plug in your room dims. you'll see a correlation between the modes and your peaks and dips. As Ethan has been instructing us all here, the best thing for small room bass peaks and nulls is bass corner traps. Cheers, Rock
|
|
|
Post by forumking on May 9, 2016 20:33:47 GMT
Thanks, I'll have a look at that.
I'm bass trapping the corners by making super chunks using rock wool that is 45kg/m3 dense. Does that sound good/useful stuff for the corners?
I'm also using that for my broadband absorbers on the walls and the cloud just forward above my head where I sit.
Thanks
|
|
|
Post by Hexspa on May 11, 2016 5:52:39 GMT
Thanks, I'll have a look at that. I'm bass trapping the corners by making super chunks using rock wool that is 45kg/m3 dense. Does that sound good/useful stuff for the corners? I'm also using that for my broadband absorbers on the walls and the cloud just forward above my head where I sit. Thanks Your room's response seems to be nearly within tolerance - good work. More is up to you.
|
|