|
Post by Nigel Spiers on Jun 20, 2017 21:55:11 GMT
Hi,
I have a long standing problem of Nulls and Peaks at various frequencies in my 3m x 5m home studio. I know it's primarily the room because the problems are completely gone when I listen through AKG Studio Headphones. I have got used to listening in one spot with my back against the back wall almost in the corner - that was the only spot in the room which had an evenly balanced sound. Over the years I have tried fixing the problems with more and thicker acoustic panels and bass traps. Luckily this is my business so I have unlimited panels and traps to experiment with - but no solution - no matter what I tried.
Recently one of my old Alesis Monitor One monitors gave up the ghost. I knew they were not high quality speakers but I was used to mixing on them. I had previously tried a pair of Adam monitors and they were good but didn't fix any of my acoustic room problems so I returned them.
So a few weeks ago I bought a pair of Focal monitors and boy what a difference!
They have an amazingly wide sweet spot and right out of the box they fixed all my nulls and peaks. I did have one problem - their extended bass completely overwhelmed the room but they have a Treble and Bass EQ adjustment and I set the Bass EQ adjustment at -4 - problem solved.
Does this mean that you don't have to acoustically treat your studio - no of course not - every studio and room benefits significantly from acoustic treatment.
However I am now convinced that other factors also play a significant role in solving acoustic problems and that includes choice of speakers and speaker placement.
I look forward to your thoughts and experiences.
Best Regards
Nigel Spiers NZ Acoustics Ltd New Zealand.
|
|
|
Post by Hexspa on Jun 21, 2017 2:36:42 GMT
Placement is known to be very important.
Also, a speaker's polar pattern may affect acoustic interference.
|
|
|
Post by Ethan Winer on Jun 22, 2017 19:18:25 GMT
Well, almost any modern speaker sounds better than those old Alesis Monitor Ones.
|
|
|
Post by Hexspa on Jun 23, 2017 1:01:43 GMT
Ethan throwin heaters
|
|
|
Post by miguel on Jul 24, 2017 19:49:45 GMT
I was thinking about what if there was an easier way after when fiddling around placement of my Magnestands (modified MMG's) in a new room. Researching speakers and stumbled on to KEF's LS50W powered speakers. Seem like technology has really dumb'd down a major part of the set up process based on some positive reviews.
|
|
|
Post by Ethan Winer on Jul 24, 2017 19:57:05 GMT
The only way to know where is best for speakers (and for you to listen) is to measure the room with suitable software while experimenting. Anything else is just guessing.
|
|
|
Post by Hexspa on Jul 26, 2017 19:24:59 GMT
Same for panels, listening position and any other type of acoustics placement.
Whereas it's common advice to extensively treat your rear wall, after measuring this room it was found that minimal rear wall treatment was best, given the amount and type of absorbers available at the time.
|
|