andy
New Member
Posts: 2
|
Post by andy on Aug 9, 2022 18:19:34 GMT
Hi. I'm making a number of large, open-faced cuboid bass traps for a modular bass trap system in my studio. They are, of course, going in all the corners, behind the speakers and on the facing walls. My question is should I put them directly IN BETWEEN the speakers? (Stacked floor to ceiling so the speakers can't 'see' each other) (Please see attached sketch) I haven't seen this done before and wondered if there was a particular reason why (other than space/aesthetic)? I had assumed, given the omnidirectional nature of bass, this could be one more area where it'd be good to soak up some energy. But maybe not? Any advice would be very gratefully taken! Many thanks andy
|
|
|
Post by Hexspa on Aug 18, 2022 13:42:55 GMT
Try it, take a measurement and see what happens. It's definitely unconventional.
|
|
andy
New Member
Posts: 2
|
Post by andy on Aug 29, 2022 19:18:17 GMT
Will do! Making the traps over the next week or so. Thanks A
|
|
|
Post by Hexspa on Aug 31, 2022 11:07:56 GMT
Will do! Making the traps over the next week or so. Thanks A I was thinking about this. One reason it might not be ideal to put an absorber between your speakers is that it'll reduce crossfeed between the monitors to your ears. Crossfeed is part of the reason speakers 'sound like speakers'. Headphone correction software such as Realphones, Slate VSX or Acustica Sienna tries to emulate 'speakers-in-a-room' by adding this function. It's possible that reducing this effect might limit how well your mixes translate. This is conjecture on my part but I figure there's a reason almost no one does it.
|
|